Fathaco

Enlarged machinery park for Wroclaw production facility!

Our production facility in Wroclaw has enlarged his machinery park with four new machines. The main target of the investment is the modernisation of the production of spindles and gear wheels as well as to increase the level of the precision and quality of our machinery.

naamloos-30.png
 
  • Turning milling centre (picture above) with the 700 mm turning diameter and 3600 mm turning length is destined for the production of spindles and basic elements for teeth wheels. This machine is equipped with X-axe, Z-axe, C-axe, Y-axe and B-axe with driven spindle.
  • Gear wheel milling machine with capacity 1250 mm diameter and 1000 mm length. On this machine is possible to mill all types of gears in fully CNC-controlled process.
  • Gear wheel profile grinding machine with capacity diameter 1000 mm and length 1000 mm is fully equipped with all necessary equipment for inside and outside grinding.
  • The production process is also supported by a modern coordinate measuring machine, which is standing in an air-conditioned room.  This machine has measuring rang X: 1200 mm; Y: 1800 mm; Z: 1000 mm and the linear measuring tolerance 1.9 + L/300 µm. The machine is equipped with the rotary table, soft-ware Calipso and supplementary soft-ware GearPro for the measuring of teeth wheels.

The main target of the investment is the modernisation of the production of spindles and gear wheels as well as to increase the level of the precision and quality. By this the level of quality of the final product increases significantly. 

The Gear Wheel Milling Machine

millingmachine.JPG

 

The Gear Wheel Profile Grinding Machine

  • grindingmachine2.JPG
  • grindingmachine.JPG

 

The Measuring Machine

measuringmachine.jpg