Fathaco

FABRYKA AUTOMATÓW TOKARSKICH (FAT)
UL. GRABISZYŃSKA
281 53-234 WROCŁAW
POLSKA

Phone: +48 (71) 36 09 100
Fax:  +48 (71) 36 09 121

Contact!

25771original-website.jpg

Together a conventional and a CNC high-precision lathe

TUR SC (560, 630, 710) is together a conventional and a CNC high-precision lathe. Equipped with control system, based on Siemens SINUMERIK 828D SL and servo motors it became a production unit for manufacturing the high-precision, complicated parts made as one-offs or in small batches.

The great advantage to the user of this lathe is the possibility of employing the highly developed techniques without any special knowledge of programming. Reduced machining times, the highest and uniform precision of all parts in the batch as well as taking away from the operator his routine work demonstrate the new level of production efficiency.

Operate in the conventional manner

The TUR SC lathe is equipped with control elements traditionally used on modern manual lathes, such as hand wheels, joystick and spindle control lever. Therefore the machine offers to its operator the possibility to operate it in the conventional manner.

The sequence of motions is realized by means of single, user friendly cycles prepared by manufacturer. The first steps are easy to master and you can then gradually increase the level of complexity.

High torque at low speeds

The spindle speed is infinitely adjustable from the minimum until maximum speed. CCS is programmable. To ensure a high torque at low speeds, the machine is equipped with a 2 speed range gearbox which is automatic programmable as standard.

The machine is as standard equipped with manual quick change tool holder (Multifi x C). Steady rest and chip conveyor are optionally available.

Standard equipment
  • Siemens electrical equipment
  • Automatic programmable change gearbox
  • Complete coolant system
  • Manual tailstock
  • Absolute encoder
Optional equipment
  • A wide range of chucks
  • Steady and follow rests
  • Chip conveyor
  • 4-way indexing quick change turret tooling manual system
Technical specification

TUR SC 560/630/710

Swing over bed

560- 630- 710

mm

Swing over saddle

300- 370- 450

mm

Distance between centres

1000 - 2000 - 3000 - 4000

mm

Max. weight of workpiece

2000

kg

Spindle speed range

0- 1800

rpm

Main drive power

12

kW

Questions? Contact us:

TUR SC series
TUR SC series